Table of Contents
Advertisement
BEFORE USING THE MACHINE
(1)
(3)
(1)
Main power switch
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep this
switch in the "
" position.
►
TURNING ON THE POWER (page 11)
(2)
Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new one.
(3)
Paper reversing section cover
This unit is used for reversing paper when 2-sided printing is
performed. Open this cover to remove a paper misfeed.
(4)
Fusing unit
Heat is applied here to fuse the transferred image onto the
paper.
The fusing unit is hot. Take care not to burn yourself when
removing a misfeed.
(5)
Transfer belt
This belt takes the image formed with toner off the
photoconductive unit and transfers the image onto paper.
Do not touch or damage the transfer belt.
This may cause a defective image.
(6)
Waste toner bottle
This bottle collects excess toner that is produced during printing.
A service technician collects replaced waste toner bottles.
10
(2)
(4) (5)
(6)
(7)
USB connector (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
Supports USB 2.0 (Hi-Speed).
(8)
USB connector (B type)
Cannot be used.
(9)
LAN connector
Connect the LAN cable to this connector when the machine is
used on a network.
Use a shielded LAN cable.
(10)
Service-only connector
This connector is for use only by service technicians.
Connecting a cable to this connector may cause the machine
to malfunction.
Important note for service technicians:
The cable connected to the service connector must be less
than 3 m (118") in length.
(11)
Power plug
(12)
External telephone line socket
When the fax function of the machine is used, an extension
phone can be connected to this socket.
(13)
Telephone line socket
When the fax function of the machine is used, the telephone line
is connected to this socket.
(7)
(8)
(9)
(10)
(11)
Facsimile expansion
kit (Option)
(12)
(13)
Advertisement
Table of Contents
