Phil & Teds columbus User Manual page 18

Installation in the vehicle
If the top tether is tightened correctly, a green
mark will turn up on the other end of the strap
release button, please do check it.
• Push the ISOFIX connectors directly into the anchorages
until heard an audible sound "click". (4b) (4c)
• Grasp the seat body to check the seat if it is fastened
tightly or shakes. If the seat shakes and the ISOFIX
connectors are pulled out, please repeat the above
steps and install it again. (4d)
4b
4f
4c
4g
• Pull out the top tether and press the tether strap release
button to extend the strap until it is long enough to
hook the user-ready tether anchorage behind. (4e) (4f)
• Hook the tether strap hook onto the user-ready
anchorages. Check there maybe are 3 anchorages
for the hook, please find one in your favor. (4g) 4h)
• Pull the tether strap on another end back to tighten
the top tether. (4i)
4d
4h
4e
4i