Room Cooling And Humidifying; Remote Control; Timer; Swing - Honeywell CL30XC User Manual

Portable evaporative air cooler
Hide thumbs Also See for CL30XC:
Table of Contents

Advertisement

Available languages

Available languages

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)

TIMER

Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 8 hours of use.

SWING

Press the SWING button until
The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air flow.
SLEEP
Press the SLEEP button until
selected, the fan will run on High for one hour, then Medium for the second hour and on Low speed
from the third hour onwards until you switch off the unit.

ROOM COOLING AND HUMIDIFYING

In cooling mode, Honeywell Air Coolers provide cool, moist air through the
evaporation of water. There is a manual Water Regulator knob located in
the ice compartment of the unit. This allows you to adjust the amount of
water pumped over the Honeycomb Cooling Media, thus helping to control
cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes a
minimal amount of water to the Honeycomb Cooling Media. This results in
less water evaporation and reduces the cooling effect.
When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water to
the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling
performance.

REMOTE CONTROL

POWER
SPEED
SWING
TIMER
COOL
SLEEP
Note:
The remote control requires AAA (2 x 1.5V) batteries for replacement.
Open the battery compartment at the back of the remote control and insert the batteries inside. Care
must be taken to insert the batteries according to the correct polarity (+ / –) markings shown inside
the battery compartment.
Always point the remote control signal transmitter towards the unit when operating. Make sure that
the signal path is not obstructed.
Remove the batteries if the unit is not going to be used for an extended period of time.
Do not drop the remote control.
Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
Do not mix old and new batteries.
Do not recharge the battery.
Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
is illuminated on the display screen.
is illuminated on the display screen. When the SLEEP mode is
POWER
: ON / OFF
SPEED
: Low / Medium / High
COOL
: Evaporative Cooling On/Off
SWING
: Controls the motion of the louvers
TIMER
: Controls the Timer function for automatic off
SLEEP
: Turns on Sleep mode
EN
2
LOUVER MOVEMENT
Water Regulator
MIN
MAX

Advertisement

Table of Contents
loading

Table of Contents