Favorite Recipes - Monogram Advantium ZSC1001 Owner's Manual

Favorite
recipe—
to adjust
or change
Favorite
recipe—
to delete
Cooking Times
Things that
are normal
you may see OPTIMIZING COOK TIME in
the display several seconds after you press
START/PAUSE. The oven automatically
senses the electrical voltage level in your
home and adjusts the cooking time up or
down for proper cooking.
Fan/Vent
of cooking, the automatic fan may continue to
run for a short time, and the display will read
Oven is Cooling. The fan will automatically
shut off when the internal parts of the oven
have cooled.
oven is on.
Lights
around the door or outer case.
off during a speedcook cycle, sometimes
even at full power levels. This is normal.
The oven senses the heat level and adjusts
automatically.
To adjust or change stored custom
speedcook recipes:
1. Press the FAVORITE RECIPE or
the SPEEDCOOK pad.
2. Turn the dial until FAVORITE
RECIPE appears. Press the dial to
enter.
3. Turn the dial until EDIT RECIPE
appears. Press the dial to enter.
To delete stored custom speedcook
recipes:
1. Press the FAVORITE RECIPE or
the SPEEDCOOK pad.
2. Turn the dial until FAVORITE
RECIPE appears. Press the dial to
enter.
Speedcooking
Advantium Oven
4. Turn the dial to the recipe you want
to change. Press the dial to enter.
Current settings appear.
5. Press the dial to edit.
6. The display will prompt you to
select the power level(s) and edit
the name. Turn the dial and press
to enter the appropriate settings.
For power level and cooking time
suggestions, use your cooking guide or
cook book.
3. Turn the dial until DELETE RECIPE
appears and press the dial to enter.
4. Turn dial to the recipe you want to
delete and press the dial to enter.
Oven Heat
Speedcook cycles. The oven begins cooking
immediately.
hot. Use caution when opening the door and
removing food.
paper, plastic, or foil when cooking during a
speedcook cycle.
the oven may automatically reduce the power
levels to maintain the appropriate level of
oven heat.
Sounds
during cooking. The relay board is turning
components on and off.
19