Menu
1.3.3 V. Position
Moves the image vertically in single-pixel increments on a scale from 0 to 100 using at
least 50 discrete steps. Default: 50 (centered in the panel). This adjustment is only
available on VGA input video.
1.3.4 Clock
Adjusts the ratio of dividing frequency of the dot clock on a scale from 0 to 100 using at
least 100 discrete steps. Default: That setting which will display alternating black and
white vertical lines without aliasing. This adjustment is only available on VGA input video.
1.3.5 Phase
Adjusts the phase of the panel dot clock with respect to panel data on a scale from 0 to
100 using at least 25 discrete steps. Default: determined/optimized by system clock. This
adjustment is only available on VGA input video.
Remark
1. "Up" & "Down" Icons will be "+"&"-" at this
menu.
2. Show the V. Position value and gauge.
1. "Up" & "Down" Icons will be "+"&"-" at this
menu.
2. Show the Clock value and gauge.
1. "Up" & "Down" Icons will be "+"&"-" at this
menu.
2. Show the Phase value and gauge
Required
Yes/No
Service Manual: ET1517L, ET1717L
ES600904 Rev B, Page 13 of 44
Yes
Yes
Yes