Advertisement
Available languages
Available languages
1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page4
DESCRIPTION
1.
Voltage selector
(120/230V)
2.
Lint pad
3.
Fabric brush
4.
Steam control dial
Before use
Please read the instructions for
use and Important Safeguards
carefully.
• Remove any packaging from
the appliance.
• Do not plug in or turn on until
assembly is complete.
• Set the voltage to the correct
position as advised hereafter.
• Remove the lint pad by pulling it
to the bottom - fig.1.
It is normal for a small
amount of smoke to be
produced the first time the
appliance is used. This will
quickly disappear.
Dual voltage
The appliance can work on both,
120V or 230V,
sure the dual voltage selector is
in the correct voltage position
before plugging in. To do this,
switch the selector which is
above the handle to the right
position - fig.2.
This is a 230V dual voltage
appliance.
n adapter plug may
be
necessary
C systems. Be
when
using
4
5.
Steam indicator / Steam
button
6.
Removable water tank
7.
Storage hook
8.
Electrical cord
appliance in the United States. If
needed, plug the steambrush into
correct adapter plug for the
specific
country
assembly into electrical outlet.
Warning! Never switch
selector while unit is plugged
in.
Filling with water
Warning ! Never use 100%,
distilled or demineralised
water as this can cause the
appliance to spit and leak.
• Your steam brush has been
designed
to
operate
untreated tap water. If your water
is very hard (check with your local
water authority) it is possible to
mix tap water with store-bought
distilled or demineralised water
in the following proportions:
-50% untreated tap water,
-50% distilled or demineralised
water.
Important: Heat concentrates
the elements contained in
water during evaporation.
and
plug
using
Advertisement
