Advertisement
Available languages
Available languages
1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page7
• Remove the lint pad from the
steam brush by pulling it to the
bottom.
• For storage, attach the lint pad
to the steam brush by lining up
the slots of the brush with the
slots of the lint pad. Gently push
the top of the lint pad into place
until it snaps in - fig.11.
fter use
Warning: never touch the steam
head until it cools completely.
• Unplug the appliance. Empty
the water remaining in the tank
and leave unit on its side to
cool.
fter the appliance has cooled
down, it may be stored in the bag
provided (depending on model).
Warning: never forget to
unplug the steam brush and
empty the tank after your
working session. While not in
use, you can hang your
steambrush by its hook.
7
EN
Advertisement
