DePuy Mitek vapr vue Instruction Manual page 3

3. The use of ACCESSORY equipment not complying
with the equivalent safety requirements of this
equipment may lead to a reduced level of safety of
the resulting system. Consideration relating to the
choice shall include:
– use of the accessory in the PATIENT VICINITY
– evidence that the safety certification of the
ACCESSORY has been performed in accordance
to the appropriate IEC 60601-1 harmonized
national standard.
4. Periodically, whenever the integrity of the switch is
in doubt, test all functions.
PRECAUTIONS
1. For continued safety and performance of the
footswitch, it is recommended that the functionality
and electrical safety of the footswitch be verified
on an annual basis by an authorized DePuy Mitek
representative.
2. The footswitch should be inspected every day or
before use.
3. The VAPR VUE Wireless Footswitch operates on a
frequency range of 2.405-2.480 GHz. It should be
tested to assure compatibility with the environment
it is working in.
4. Replace the batteries in the transmitter with
high quality "AA" size 1.5-volt alkaline batteries
(IEC LR6) with a rated capacity of no more than
2000mAh. Do not fit Lithium, Zinc or re-chargeable
batteries. Never mix manufacturers when replacing
the batteries. Never mix old and new batteries.
Care must be taken when replacing the batteries
not to damage the O-ring seal on the battery cover.
5. The O-ring seal should be replaced whenever it
is damaged or its integrity is in question. DePuy
Mitek recommends the seal should be replaced at
a minimum every third time batteries are replaced.
When replacing the seal lubricate it with petroleum
jelly.
6. If the VAPR VUE Wireless Footswitch will not be
used for an extended period of time, remove the
2