Fault Codes & Diagnostics - Indesit ICD661UK Service Information

Indesit Company
FAULT CODES & DIAGNOSTICS
If an error is detected during the cycle, the programme will be terminated and one of the following errors
will be displayed using a combination of the programme LEDs on the console panel.
The relevant LED(s) will flash in the event of a fault. The On/Off LED will also flash.
Fig. 1 identifies the programme progress LED to the corresponding LED shown in the fault code chart.
modify the fon _ ___ _______
_______
_____
1 2 3
Codes
'Dry' LED 3 flashing
quickly
'Rinse' and 'Dry' LEDs
2 and 3 flashing
quickly
'Main Wash' LED 1
flashing quickly
'Main' and 'Rinse'
LEDs 1 and 2 flashing
quickly
'Main', 'Rinse' and 'Dry'
LEDs 1, 2 and 3
flashing quickly
Service Manual UK
LEDs 1, 2, 3 flashing quickly and buzzing indicates a
Fault Condition
Meanings
Fill time 'Time Out'
Time out heating or not
reached temperature
Float Switch operated due
to water in base
Failure of temperature
sensor
Failure of temperature
sensor
16 of 28
Possible Causes
Inlet valve is faulty or water intake is restricted
or water pressure too low.
Malfunction of temperature sensor or heating
element.
MAchine over filled or is leaking.
Open circuit temperature sensor or wiring.
Short circuit temperature sensor.
English