Multi-Print Files; Print Text; Copy Text; Copy Graph - BAS 100B/W Instruction Manual

Omit File Names Above
Graph

9.3 Multi-Print Files

This command sets up a print queue for data files. Up to 100 files can be selected
from the Multi-Print Files dialog box. Each data file is printed on a separate page
(use the Multi-Graph option in the Graphics menu followed by Print Graph for
multiple graphs on the same page). If all the data files are for the same Mode of
Operation, the Data Sets and Data Type specified in Graph Options are printed. If
the data files use different Modes of Operation, then the default Data Sets and Data
Type are used.

9.4 Print Text

Print Text prints any text selected (highlighted) by dragging the mouse over the
desired lines in the Main window.

9.5 Copy Text

This command copies to the Clipboard any text selected (highlighted) by dragging
the mouse over the desired lines in the Main window. From the Clipboard, it can be
transferred to other Windows programs.

9.6 Copy Graph

Copy Graph transfer the present graph window (without its frame) to the Clipboard.
From the Clipboard it can be transferred to other Windows programs.

9.7 Print Setup

This command allows the default printer and other printer options to be changed
without using the Control Panel. The options available depend on the type of printer
and the printer driver installed in Windows.
This option specifies whether the file name is above
the graph both on the monitor and on printed/copied
to clipboard graphs.
9-2