Load Data; List Data; Save Data; List Text File - BAS 100B/W Instruction Manual

Electrochemical workstation

Table of Contents

Directories List

Drive Select

3.2 Load Data

The Load Data command reloads a data file previously saved by the 100W software,

in either binary (.BIN) or text (.TXT, .CRL, .SPC and .TAB) format. .TXT files from

earlier BAS File Service programs can also be loaded.

The List Data command lists the data currently in main memory. This allows review

of the data without having to save the data as a text file. During listing, you can press

<Enter> to Pause the listing or press <Esc> to Cancel further lines or click on

[Pause] or [Cancel] in the BAS100W Listing box.

Data can be saved in the BAS100W's compact binary (.BIN) format or in the text

(.TXT, .CRL, .SPC and .TAB) format, which can be read by other programs.

The List Text File command is used to list data files previously saved in the text

(.TXT, .CRL, .SPC and .TAB) format. Any text file having the .TXT, .CRL, .SPC

and .TAB extension can be listed. During listing, you can press <Enter> to Pause the

listing or press <Esc> to Cancel further lines or click on [Pause] or [Cancel] in the

BAS100W Listing box.

The current pathname is shown above this list box, and is

updated when a different disk drive or directory is selected.

The path is changed by selecting one of the directories

shown in this list and then clicking [OK] or pressing

<Enter> (alternatively, you can double-click on the desired

directory). Files in the selected directory (which is now the

default directory) will then be listed in the Files List.

This drop-down list box show the current disk drive. To

select a different drive, click on the [Down-Arrow] box

and select the desired drive.

3-2

Table of Contents

Show Quick Links

Table of Contents