Advertisement
QuickSpecs
Overview
At A Glance
At A Glance
At A Glance
At A Glance
Industry-leading throughput and latency performance
Supported on all G6 c-Class servers, in mezzanine slots1, 2 or 3 (full height servers) or slots 1 and 2 (half height servers).
Type I Adapter
Supports Mellanox LLE Low Latency Ethernet technology
IEEE 802.1p QoS 802.3x flow control, and 802.3ap 10GBase-KR
9K Jumbo frames
Dual 10Gb ports provide up to 40Gb full duplex per adapter
Supports HP's exclusive Flex-10 technology that allows you to set any bandwidth from 100Mb to 10Gb on up to four "Physical
Function " NICs per port when combined with the 10Gb Flex-10 Virtual Connect module
NOTE: Flex-10 support will be added via the VC3.13 release.
NOTE:
NOTE:
NOTE:
Models
Models
Models
Models
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE:
NOTE:
NOTE:
NOTE: The NC542m network adapter card is required for each server blade connecting to a 10Gb interconnect
in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The
NOTE:
NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
Kit Contents
Kit Contents
Kit Contents
Kit Contents
1.
NC542m mezzanine adapter
2.
Quick install card
3.
Product warranty statement
4.
Drivers, user guide, and utilities via:
DA - 13502
North America — Version 4 — September 10, 2010
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
http://www.hp.com
Adapter
Adapter
Adapter
Adapter
539857-B21
Page 2
Advertisement
