Advertisement
SWITCH UP
(SOLAR-RECHARGEABLE BATTERIES)
Slide the battery switch to UP position once
solar-rechargeable batteries are inserted.
SWITCH DOWN
(START-UP / RESET) (STANDARD ALKALINES)
Slide switch to DOWN position before
(1) start-up / reset or (2) any type of battery replacement
Setup with Standard Alkaline Batteries
1. Insert the 2 "AA" Alkaline batteries (not included) into the solar
station. Observe the correct polarity.
2. Gently press the RESET button on the Sensor to activate.
3. After 5 minutes place sensor outside in a shaded location.
View: Press the MIN/MAX button to view:
Outdoor Temperature minimum and maximum.
•
Indoor temperature minimum and maximum.
•
Reset MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset
the indoor and outdoor minimum and maximum temperatures to
current temperatures.
It is important to place the sensor in a bright environment for the
•
solar panel to collect enough light to recharge the internal power
cell.
WS-6020U-IT
MIN/MAX Readings
Position Outdoor Sensor
www.lacrossetechnology.com/support
WARNING: Do NOT recharge the
Solar-rechargeable batteries
(included) outside of this product
because it will damage the batteries
and other charging devices.
Page | 2
Advertisement
