Advertisement
5. Month
6. Date
7. Fahrenheit/Celsius
MIN/MAX Temperature Readings
The minimum and maximum temperatures are recorded from the power
up of the temperature station until you reset the values. Reset daily, if
you want a 24-hour MIN/MAX reading.
View: Press the MIN/MAX button to view:
Indoor minimum, indoor maximum, outdoor minimum and outdoor
maximum temperature readings.
Reset: Hold MIN/MAX button for three seconds to reset all the indoor
and outdoor temperature to current temperatures.
Position Outdoor Sensor
•
Mount the Outdoor Sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•
The maximum wireless transmission range to the alarm clock is over
260 feet (80 meters) in open air, not including walls or floors.
•
Be sure the outdoor sensor is mounted vertically.
Restart: When the outdoor readings show dashes:
1. Bring the sensor in the house five feet from the weather station.
2. Remove batteries from the sensor, and the batteries from the
weather station.
3. Press any button 20 times.
4. After 15 minutes insert batteries into the sensor, as well as batteries
into the weather station.
5. Wait 15 minutes to establish a strong connection. Place sensor
outside in shaded location.
Care & Maintenance
•
Do not mix old and new batteries
•
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Always purchase the correct size and grade of battery most suitable
for intended use.
•
Replace all batteries of a set at the same time.
•
Clean the battery contacts and also those of the device prior to
battery installation.
•
Ensure the batteries are installed with correct polarity (+and -).
Model: WS-9066U-IT
www.lacrossetechnology.com/support
pg. 4
Advertisement
