D-Link DSL-2640R User Manual page 21

Section 3 – Configuration
Quick Start Wizard - For Bridge Mode connections:
1. If you are instructed to change the VPI or VCI number, type in the
correct setting in the available entry fields. Most users will not need
to change these settings. The Internet connection cannot function if
these values are incorrect.
2. Select the specific Connection Type from the drop-down menu.
The available Bridge Mode connection and encapsulation types
are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux.
3. Click Next to go to the next window and complete the Quick Start
Wizard.
Quick Start Wizard - Finish
Finally, if you are satisfied that you have entered all the necessary
information correctly, click the Next button to save the new configuration
settings. If you need to change settings from a previous window, click the
Back button.
Click the Close button to complete the Quick Start setup procedure.
D-Link DSL-2640R User Manual 18