Table of Contents
Advertisement
[WIRING PRECAUTIONS]
Do not grab on the cable when removing the communication or power
cable connected to the module.
When disconnecting a cable without a connector, first loosen the screws on
the part that is connected to the module.
Pulling the cable when it is still connected to the module may cause
damage to the module or cable, or misoperation due to cable contact
failure.
Always ground the shielded cable for the programmable controller.
There is a risk of electric shock or malfunction.
When wiring, be sure to verify the rated voltage of the product as well as
the terminal layout. Fire or failure may result if incorrect voltage is input or
incorrect wiring is performed.
Connecting terminals with incorrect voltage may result in malfunction or
mechanical failure.
[STARTUP AND MAINTENCE PRECAUTIONS]
Mounting/removing the module to/from the base and the terminal block is
limited to 50 times after using a product. (IEC 61131-2-compliant)
Failure to do so may cause malfunctions.
CAUTION
CAUTION
A - 3
Advertisement
Table of Contents
