Service Position; Checking And Repairing Of Smps And Ac Inlet P.c.b - Panasonic SC-HTB70P Service Manual

12 Service Position

Note: For description of the disassembly procedures, see the Section 11

12.1. Checking and Repairing of SMPS and AC Inlet P.C.B.

Step 1 : Remove the Rear Cabinet Block.
Step 2 : Remove the Amplifier Unit.
Step 3 : Remove the SMPS P.C.B. and AC Inlet P.C.B..
Step 4 : Place the Amplifier Unit back to the original position on the Front Panel Block.
Step 5 : Attach 2P Wire of the connector (CN6301) on the Tilt Switch P.C.B..
Step 6 : Attach 5P Wire at the connector (CN2002) on the Main P.C.B..
Step 7 : Attach 6P Wire at the connector (CN2003) on the Main P.C.B..
Step 8 : Attach 8P FFC at the connector (CN2001) on the Main P.C.B..
Step 9 : Attach 4P Wire at the connector (CN5101) on the Main P.C.B..
Step 10 : Attach 4P Wire at the connector (CN5100) on the Main P.C.B..
86