Table of Contents
Advertisement
5 General/Introduction
5.1.
About Bluetooth and Operation
About Bluetooth
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
Frequency band used
This system uses the 2.4 GHz frequency band.
Certification of this device
This system conforms to frequency restrictions and has
received certification based on frequency laws. Thus, a
wireless permit is not necessary.
The action below are punishable by law in some
countries:
-
Taking apart or modifying the unit.
-
Removing specification indications.
Restrictions of use
Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
All devices must conform to standards set by Bluetooth
SIG, Inc.
Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
This system supports Bluetooth
depending on the operating environment and/or
settings, this security is possibly not sufficient. Transmit
data wirelessly to this system with caution.
This system cannot transmit data to a Bluetooth
device.
Range of use
Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment,
obstacles or interference.
Interference from other devices
This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if the main unit is located too close to
other Bluetooth
GHz band.
This system may not function properly if radio waves
from a nearby broadcasting station, etc. are too strong.
Intended usage
This system is for normal, general use only.
Do not use this system near equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
®
®
security features. But
®
®
devices or the devices that use the 2.4
®
Bluetooth
By using the Bluetooth
to the sound from the Bluetooth
from this system wirelessly.
Preparation
Turn on the Bluetooth
place the device near the main unit.
®
Bluetooth
Press [ ] to select " ".
If the "
" indicator flashes quickly, go to step 3.
Press and hold [ ] until the " "
indicator flashes quickly.
If the "
" indicator flashes slowly, repeat step 2.
®
Select "SC-HTB70" or "SC-HTB65"
from the Bluetooth
Bluetooth
®
menu.
If prompted for the passkey on the Bluetooth
"0000".
Once the Bluetooth
®
device is connected, the "
stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Connecting a Bluetooth
device
Press [ ] to select " ".
If the "
" indicator lights, a Bluetooth
connected with this system. Disconnect it. (
Select "SC-HTB70" or "SC-HTB65"
from the Bluetooth
Bluetooth
®
menu.
Disconnecting a Bluetooth
Press and hold [
] until the "
slowly.
When "
" is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth
®
device.
The Bluetooth
®
device will be disconnected if a different
audio source (e.g. "TV") is selected.
Refer to the operating instructions of the Bluetooth
for further instruction on how to connect a Bluetooth
device.
This system can only be connected to one device at a time.
To change the sound quality, refer to "Bluetooth
communication mode".
10
connection
®
connection, you can listen
®
audio device
®
feature of the device and
pairing
®
device's
®
device, enter
" indicator
®
®
device is already
below)
®
device's
®
device
" indicator flashes
®
device
®
®
Advertisement
Table of Contents
