Service Position; Main Unit (Su-Htb885) - Panasonic SU-HTB885EB Service Manual

9 Service Position

9.1.

Main Unit (SU-HTB885)

Note: For description of the disassembly procedures, see the Section 8.5
9.1.1. Checking SMPS P.C.B.
Step 1 : Remove Rear Cabinet Block.
Step 2 : Remove SMPS P.C.B..
Step 3 : Place support block at both sides of Front Cabinet Block.
Step 4 : Place SMPS P.C.B. on an insulated material.
Step 5 : Connect 7P wire to connector (CN1) on SMPS P.C.B..
Step 6 : SMPS P.C.B. can be checked as diagram shown.
9.1.2. Checking Panel P.C.B.
Step 1 : Remove Rear Cabinet Block.
Step 2 : Remove Panel P.C.B..
Step 3 : Place Panel P.C.B. on an insulated material.
Step 4 : Connect 15P FFC to connector (CN3300) on Panel P.C.B..
Step 5 : Panel P.C.B. can be checked as diagram shown.
46