Troubleshooting - iHome iBT10 Instruction Manual

Unit doesn't respond (no power)
• Make sure unit is completely charged.
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT10.
• Make sure the unit is on
Unit doesn't respond (locked up/ "frozen")
If the unit does not respond, try resetting the unit. Insert a paperclip or similar into the
Reset port located on back of the unit under the rubber seal for a few seconds. Note that
doing so will clear settings.
Trouble pairing device/computer with iBT10
Bluetooth implementation varies depending on your device's hardware and operating
system. Please see our website for updates on pairing.
• When you power ON the speaker, it will automatically link with the last previously
paired Bluetooth device if the device is still within range (about 33 feet).
• If your device does not auto-link when within range, re-pair the device. To do so, first
delete the iBT10 from your Bluetooth devices menu.
• Make sure your device is working properly. Check your device's manual for details on
Bluetooth pairing and linking.
For further information and to see the latest instructions, visit
www.ihome.com/support
17

Troubleshooting