Operational Error Codes; Table 24.Operational Error Code Displays - Motorola ASTRO XTSTM 2500 Basic Service Manual

Radio-Level Troubleshooting
Error
Code
02/88 DSP RAM Fatal Error -- Note: not a checksum failure
02/90 General DSP Hardware Failure (DSP startup message not
received correctly)
NOTE: If the corrective action does not fix the failure, send the radio to the depot.
Operational Error
Codes
Error Code
FAIL 001
FAIL 002
66
Table 23. Power-Up Error Code Displays
Description
During radio operation, the radio performs dynamic tests to determine if the radio
is working properly. Problems detected during these tests are presented as error
codes on the radio's display. An error code indicates that a problem exists and that
a service technician should be contacted. Operational error codes are listed in
Table 24.
Table 24. Operational Error Code Displays
Description
Synthesizer Out-of-Lock
Selected Mode/Zone Codeplug Checksum Error
Corrective Action
Turn the radio off, then on.
Turn the radio off, then on.
Corrective Action
a. Reprogram external codeplug
b. Send radio to depot
Reprogram external codeplug