Configure The Settings For Switch-On - Philips 32HFL3331/93 User Manual

Configure the settings for
switch-on
You can configure settings (such as volume,
channel, picture format, etc) that are used as
default, when the TV is switched on.
1
Enter the PBS setup menu.
PBS Menu
PBS Mode
Application
Consumer Setup
Switch On Settings
Control Settings
Blank Channel
Pay-tv Setup
Multi RC
Smart RC
Store
USB to TV
TV to USB
Reset
2
to select [Switch On Settings]
Press
(Switch on setting). Select one of the
following options:
[Switch On Vol] (Switch on volume):
•
Presets the volume.
[Max Volume] (Maximum volume):
•
Presets the maximum volume that a
guest can select.
[Switch On Ch] (Switch on channel):
•
Presets the channel that is displayed
when the TV is switched on.
• [Picture Format] (Picture format):
Presets the picture format.
[Power On] (Power on): Presets the
•
power mode.
• [Smart Power] (Smart power): Presets
the power savings mode.
[Display Msg] (Display message):
•
Enables or disables the display of a
welcome message.
• [Welcome Msg] (Welcome message):
Specifies a welcome message.
[Set ID] (Set ID): Specifies an ID
•
for signage applications. This option
appears only if you select [Application]
> [Signage] from the PBS setup menu.
Switch On Vol
Max Volume
Switch On Ch
Picture Format
Power On
Smart Power
Display Msg
Welcome Msg
Set ID
Preset the switch-on volume
1
Enter the PBS setup menu.
2
to select [Switch On
Press
Settings] > [Switch On Vol]. Select one
of the following options:
[Last Status] (Last status): Select
•
[Off] (Off) to switch the TV on at
a user defined volume. Select [On]
(On) to switch the TV on at the last
volume setting.
[User Defined] (User defined): Press
•
to set the volume that is used
when the TV is switched on.
3
Press to return to the previous screen.
Preset the maximum volume
1
Enter the PBS setup menu.
2
Press to select and enter [Switch
On Settings] > [Max Volume].
3
Press to set the maximum volume
that a guest can select.
4
Press to return to the previous screen.
Preset the switch-on channel
1
Enter the PBS setup menu.
2
to select [Switch On
Press
Settings] > [Switch On Ch]. Select one
of the following options:
[Last Status] (Last status): Select
•
[Off] (Off) to switch the TV on at
a user defined channel. Select [On]
(On) to switch the TV on at the last
viewed channel.
[User Defined] (User defined):
•
Press to set the channel that is
displayed when the TV is switched
on.
3
Press to return to the previous screen.
EN
7