Enable or disable the high-security
mode
1
Enter the PBS setup menu.
2
to select [Control Settings]
Press
> [High Security Mode]. Select one of
the following options:
[Off] (Off): The PBS setup menu
•
can be displayed using the PBS setup
remote control or the guest remote
control.
[On] (On): The PBS setup menu can
•
be displayed using the PBS setup
remote control only.
3
Press to return to the previous screen.
Enable or disable HDMI-CEC
1
Enter the PBS setup menu.
2
to select [Control Settings]
Press
> [HDMI-CEC IN]. Select one of the
following options:
•
[Off] (Off): Disables HDMI-CEC
feature.
[On] (On): Enables HDMI-CEC
•
feature.
3
Press to return to the previous screen.
Enable or disable video and audio
output to a recording device
You can disable AV OUT (VIDEO and
AUDIO L/R) to blank out the video and audio
output to a recording device. This prevents
illegal copying of PayTV channels.
1
Enter the PBS setup menu.
2
to select [Control Settings]
Press
> [Monitor Out]. Select one of the
following options:
[Off] (Off): Disables AV OUT
•
(VIDEO and AUDIO L/R)
[On] (On): Enables AV OUT
•
(VIDEO and AUDIO L/R).
3
Press to return to the previous screen.
10
EN
Enable or mute the TV speakers
1
Enter the PBS setup menu.
2
Press
to select [Control Settings]
> [Loud Speaker Mute]. Select one of
the following options:
[Off] (Off): The TV speakers
•
are enabled. However, when a
headphone is plugged in, the TV
speakers are muted and the audio is
routed to the headphone.
[On] (On): TV speakers are muted.
•
3
Press to return to the previous screen.
Note
Not available in model 42HFL3381/93
•
Use blank channel
You can blank the video of the current
channel so that it can be used for off-air radio
transmission, music CDs, etc.
1
Enter the PBS setup menu.
2
Press
to select and enter [Blank
Channel].
3
Press
to select one of the following:
[Off] (Off): Enables video display for
•
the current channel.
[On] (On): Disables video display for
•
the current channel.
4
Press to return to the previous screen.
.