Denon DN-500CB User Manual page 11

Playing Audio Files on a USB Flash Drive
To play audio files on a USB flash drive:
1. If the unit is off, press the Power button to power it on.
2. Connect your USB device (mass storage class) to the USB Port.
3. Select USB as your desired media type (described in
4. Select an audio file:
•
When a USB flash drive is first connected, files on the root directory will be shown. Press and hold the Folder
button to open to the first folder. All files within that folder will appear first. All other playable content on the
flash drive will appear after. To access another folder, press and hold the Folder button again.
•
To move through audio files, turn the Jog Dial on the unit.
•
Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g., 1 then 2 for Track 12).
In USB Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To stop playback, press the Stop button.
• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
• To change the view mode, press the Folder/Time button.
• To select another folder or audio file, follow the steps described in Step 4 above.
• To show different track information in the display, press the Text button. It will cycle through the file name
and other text information.
• To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One
track will repeat indefinitely), Repeat All
will repeat).
• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time
has elapsed of the current track) and Remaining (how much time remains of the current track).
• To remove a USB device, gently remove it from the USB Port when it is not playing. (Removing a USB device
while it is playing can damage it.)
Playing Audio from a Bluetooth Device
To play Bluetooth Tracks:
1. If the unit is off, press the Power button to power it on.
2. Select Bluetooth (BT) as the media type (described in Selecting the Media Playback Mode).
3. Navigate to your Bluetooth device's setup screen, find "DN-500CB" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
In Bluetooth Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To pause playback, press the Stop button.
• To remove the list of paired devices and disconnect from any currently paired device, press and hold the
Clear button to remove all paired devices from the unit's memory (and also unpair from a currently paired
device). After the devices have been cleared from the unit's memory, to connect again to the same device, go to
your Bluetooth device and select "Unpair" or "Forget the Device", depending on the type of device that you
have. You can then select DN-500CB from your list of Bluetooth devices and connect.
Selecting the Media Playback
(the list of all tracks will repeat indefinitely), and Repeat Off (no tracks
Mode).
(the same
11