Page 1
BEDIENUNGSANWEISUNG mit Montageanweisungen Instructions for use and installation instructions Instructions d'utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem 9660.0GE KDUM 9660.0GE 12660.0GE KDUM 12660.0GE 227954 R31...
Disposing of the packaging For your information... Please ensure the environmentally-friendly disposal of the pack- Please read this manual carefully before using your hood. It con- aging that came with your appliance. Recycling the packaging tains important information on safety and on how to use and look material saves on resources and cuts down on waste.
Safety instructions Connection and operation • It is absolutely essential to observe maintenance and cleaning Safety instructions cycles as failure to do so results in a risk of fire as fat deposits • The appliances are constructed in accordance with the rele- may ignite.
Appliance description Appliance description 1. Chimney top 2. Chimney bottom 3. Canopy 4. Glass canopy (safety glass) 5. Control elements 6. Metal grease filters, both sides, 2 filters 7. LED lamp 8. Metal screen 9. Metal grease filter 10. Pressure point for opening (see p. 23)
Operation Instructions for using the hood LED lamp Operation The power setting of the hood should be adapted to the occur- Pressing the Lamp button will switch the lamp on and off. rence of steam during cooking and frying, i.e. for little steam a low setting should be chosen;...
Maintenance and care Cleaning the hood The mains plug must be pulled out or the fuse Maintenance and care switched off or screwed out before maintenance or The hood may only be cleaned when the mains plug cleaning work is carried out on the hood! has been pulled out or the fuse switched off! Why maintenance? Use only a mild cleaning agent (e.g.
Maintenance and care Opening the hood Removing the metal screen The metal screen can be removed to clean it. It must hang Disconnect the hood from the mains or switch off downwards to remove it; the hood is open. the fuse! Caution –...
Maintenance and care Cleaning the metal grease filters Replacing the charcoal filters (recirculation air operation only) Disconnect the hood from the mains or switch off the fuse! The charcoal filter is located directly Make sure that the grid is not damaged when you behind the metal grease filter.
Maintenance and care Replacing the LED lamp Disconnect the hood from the mains or switch off Metal grease filter the fuse before replacing the lamp. Do not look into the intensive light source (LED) for any length of time! Only an original LED strip may be installed; these are only available from Customer Service.
What to do if trouble occurs The hood is suddenly much noisier during Interference with and repairs to the hood by What to do if trouble occurs unqualified persons are dangerous as they can operation. result in electric shock, or short circuit. Do not •...
Assembly instructions Note Safety instructions for the Assembly instructions extraction air mode KÜPPERSBUSCH cooker hoods may only be built-in in accordance with the instructions included in this manual. In the case of failure to observe these instructions, Operating the hood in the extraction air mode in KÜPPERSBUSCH shall decline any liability and the kitchens with household furnaces requiring a approved marks of conformity will become invalid!
Assembly instructions Tips on the outgoing air duct Electric connection Only suitable materials which are as flame resistant as possible The hood is fitted with a mains cable and a plug and can be con- may be used for connecting the hood with an extraction air sys- nected to any shockproof socket supplying 230 volts of alternat- tem (e.g round pipe, square system, flexible aluminium hose, ing current, 50 Hz which has been installed in accordance with...
Assembly instructions Installation Dowel 6 mm Dowel 6 mm Dowel 8 mm Dowel 8 mm Use the M5x20 screws supplied to adjust the body of the hood into a horizontal position. Install the mounting bracket (1) for the top part of the chimney underneath the ceiling with screws and dowels.
Page 14
Assembly instructions Recirculating air mode only Mount the air deflecting box and the mounting bracket (1) for the top part of the shaft. Insert a pipe connection between the hood and the air deflecting box (not included in delivery). Pull the top part of the chimney upwards until it reaches the ceiling. Fasten the top chimney part with screws.
Assembly instructions Start of operation After installing the hood, check the functions (lighting and fan). Technical data KD 9660.0GE KDUM 9660.0GE Dimensions Height/ Width/ Depth ..mm 650 - 1000 x 900 x 520 Extraction air connection piece Outer diameter.
Need help?
Do you have a question about the KD 9660.0GE and is the answer not in the manual?
Questions and answers