10 APPLICATION OF SETTINGS
10.1 SETTING EXAMPLE
10.1.13 INPUTS/OUTPUTS
The following inputs and outputs will be used in this example. Make the following changes in EnerVista UR Setup or
through the
menus:
SETTINGS
INPUTS/OUTPUTS
CONTACT INPUTS
CONTACT INPUT H7a(H7c)
Make the following changes in EnerVista UR Setup or through the
SETTINGS
INPUTS/OUTPUTS
VIRTUAL OUTPUTS
menus:
VIRTUAL OUTPUT 1(4)
Make the following changes in EnerVista UR Setup or through the
SETTINGS
INPUTS/OUTPUTS
CONTACT OUTPUTS
menus:
CONTACT OUTPUT H1(H4)
10
GE Multilin
G60 Generator Protection System
10-11