Led Indicators; Power Green - D-Link DGS-1008P Quick Installation Manual

LED INDICATORS

The LED indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
LED
Power
Link/Act/Speed
PoE ( Ports1 to 4 )
PoE Max.
4
Color Status
Green Solid light
Off
Green Solid light
Blinking
Amber Solid light
Blinking
Off Light off
Green Solid light
Off
Red Blinking
Solid Light
Red Solid light
Blinking
Off Light off
Description
Power on
Power off
Connection to a 1000 Mbps Ethernet device.
The port is receiving or transmitting data.
Connection to a 10/100 Mbps Ethernet device.
The port is receiving or transmitting data.
No link
The port is successfully connected to a PoE
device and is powering the device properly.
No connection to a PoE device
Power management mode:
A valid POE load is connected to port output
lines, but PSE has no sufficient power for
supplying the required load power. Port power is
not activated
Overload or short circuit is detected on port
output lines. Port power is not activated
Total power consumption is above Power Guard
Band but below total budget. (65-75W).
Output power to PoE devices has exceeded the
maximum power budget (75W).
The power usage is less than the power budget
of 65 W.
DGS-1008P