Tools And Equipment - Toshiba Satellite M30 Instruction Manual

Hide thumbs Also See for Satellite M30:

Table of Contents

4.1 General

Tools and Equipment

The use of Electrostatic Discharge (ESD) equipment is very important for your safety and the

safety of those around you. Proper use of these devices will increase the success rate of your

repairs and lower the cost for damaged or destroyed parts. The following equipment is

necessary to disassemble and reassemble the computer:

• One M2 point size 0 Phillips screwdriver to remove and replace screws.

• One M2.5/M3 point size 1 Phillips screwdriver to remove and replace screws.

• One 4 mm flat-blade screwdriver.

• Tweezers, to lift out screws that you cannot grasp with your fingers.

• ESD mats for the floor and the table you are working on.

• An ESD wrist strap or heel grounder.

• Anti-static carpeting or flooring.

• Air ionizers in highly static sensitive areas.

• Antenna coaxial cable disconnector

Satellite M30 Maintenance Manual (960-455)

4 Replacement Procedures

4-5

Table of Contents