3Com 56k User Manual page 20

Installation of the Message Modem with Windows 95
If this screen does not appear, refer to "If Plug and
Play Does Not Detect Your Modem" located in
"Troubleshooting and Support Resources" on the CD-
ROM.
6. Next, click the Diagnostics tab at the top of the
"Modems Properties" screen. Write down the
COM setting for your modem in the space. Your
screen may show a different setting than that
shown in the following screen. You will need to
know this setting when you install your
communications software.
COM Port_________
7. Click More Info....
The modem's command set should appear in the
box.
16
Click OK.
Turn to "Software Installation" (page 19) for
information about installing communications
software.
Congratulations!
You are ready to start using your
3Com U.S. Robotics Message Modem.