3Com 56k User Manual page 16

Installation of the Message Modem with Windows 95
If this screen does not appear, refer to "If Plug and
Play Does Not Detect Your Modem" located in
"Troubleshooting and Support Resources" on the CD-
ROM.
12
6. Next, click the Diagnostics tab at the top of the
"Modems Properties" screen. Write down the
COM setting for your modem in the space
below. Your screen may show a different setting
than that shown in the following screen. You will
need to know this setting when you install your
communications software. Click OK.
COM Port___________.
Click More Info....
7.
The modem's command set should appear in the
box.