Jacuzzi J-495 Owner's Manual page 64

J-400
A. Temp Lock (Figure 12.8b):
1. Tap to lock the temperature feature.
2. Tap (the first block) to select a number. Use
a number from 0-9. Then move on to the next number until a four-digit
code has been selected.
3. Tap to activate the locking feature.
4. The adjust temperature feature is disabled, but the spa will still
perform all scheduled tasks.
5. Tap to return to the "Settings" Menu.
B. Spa Lock (Figure 12.8b):
1. Tap to lock the spa. When this feature is activated both the spa
and temperature lock are highlighted Orange.
2. Tap (the first block) to select a number. Use
a number from 0-9. Then move on to the next number until a four-digit
code has been selected.
3. Tap to activate the locking feature.
4. All activation and adjustment features are disabled but the spa will
still perform all scheduled tasks.
5. Tap to return to the "Settings" Menu.
C. Service Lock (Figure 12.8b):
1. Tap to lock the spa. When this feature is activated all the lock
buttons highlighted Orange.
2. Tap (block) to select a number. Use
number from 0-9. Then move on to the next number until a four-digit
code has been selected.
3. Tap to activate the locking feature.
4. All spa functions are locked to allow for a temporary service mode for
filter cleaning.
Note: This mode has a time out of 2 hours. The spa should not be left
in this lock mode for an extended period. Especially in colder climate or
when freezing conditions exist.
D. To Unlock (Figure 12.8c):
1. Enter the Lock menu. The type of lock that is
active will already be highlighted in Orange.
2. Tap (the first block) to start entering the
code. Then move on to the next number until
the four-digit unlock code has been entered.
3. Tap to unlock.
4. Tap a few times to exit the menu.
Note: A default passcode can be used in case the
original passcode is lost or forgotten. The code "0772" will unlock the
locked setting.
Page 58
or to select
or to select
or to select a
Lock
Unlock
Figure 12.8c