Apm - Asus SABERTOOTH 990FX R3.0 Manual

3.6.8

APM

ErP Ready [Disabled]
Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When this item is set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power Off]
[Power On]
[Last State]
Power On By PME [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3-24
The system goes into off state after an AC power loss.
The system goes into on state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PME to wake up by PCI/PCIE devices.
Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Disables Ring to generate a wake event.
Enables Ring to generate a wake event.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/
Second will become user-configurable with set values.
Chapter 3: BIOS Setup