Trelock BB 2000 Manual page 9

2.4 Settings for wheel 1 and
wheel 2
You can use your cycle com-
puter on two cycles, even if
they have different wheel radii.
An own sensor for each cycle
is required for this purpose.
The switch-over from wheel 1
to wheel 2 is performed auto-
matically.
2.4.1 Entry of the code no.
• Entry of the code for "cycle
1" and/or "cycle 2" by pres-
sing the MODE button
(repeatedly)
• Validate the individual digits
with the SET button
• Repeat the process for the
other digits
Please enter the code no. on
page 2 of this operating
manual. The sticker should
subsequently be pulled off the
sensor.
10
48
• Switch to "cycle 1" by pres-
sing the SET button
• Choose between "cycle 1"
and "cycle 2" by pressing the
MODE button
• Confirm by pressing the SET
button
Code-No. 1
BB 4000
Code-No. 1
BB 4000
bike 1
BB 4000
Code-No. 1
BB 4000
Code-No. 1
BB 4000