Trelock BB 2000 Manual page 26

Start a new trip/leg
Measurement of the current trip/leg is halted by
pressing the SET button. All data are saved and
a new trip/leg is begun in the background. The
data of the last trip continue to be displayed and
the trip no.flashes. After pressing the SET button
again, the data of the current trip/leg are display-
ed.
Displaying and deleting trip/leg data
• Press the SET button for 3 sec.
• The display "Show trips"
appears
• Selection of "Show
trips" and "Delete
trips" by pressing
the MODE button
• After pressing the
SET button in
-
"Show trips", the
net cycling times
and the number of
revolutions in all trips/legs
appear
By pressing the SET button for 3 seconds, all
values of the trip/leg which has just been dis-
played will be deleted.
If the SET button is pressed for 3 seconds in the
"Delete trips" window, the data recorded for
trips/legs will be deleted and a new trip/leg will
be started.
Pressing the MODE button takes you back to the
submenu "Trip".
3 seconds
3 Sekunden
La 01
p
BB 4000
all
5.5 Submenu "Pilot" PILOT
Pilot
BB 4000
Starting, stopping and resetting the stop-
watch
• Start or stop the stopwatch by pressing the
SET button
• Zeroing of the stopwatch by pressing the SET
button for 3 seconds
5.6 Submenu "Total" TOTAL
Totall
y
BB 4000
Stopwatch
Current pedal fre-
quency
% time of the pedal
frequency within
the training limits
set
Total cycling time of
the current wheel
Current pedal fre-
quency
Total revolutions
65
27