Trelock BB 2000 Manual page 20

Start a new trip/leg
Measurement of the current trip/leg is halted
by pressing the SET button. All entered data
are saved and a new trip/leg is begun in the
background. The data of the last trip continue
to be displayed and the trip no.flashes. After
pressing the SET button again, the data of the
current trip/leg are displayed.
Displaying and deleting trip/leg data
• Press the SET button for 3 sec.
• The display "Show trips"
appears
• Selection of "Show
trips" and "Delete
trips" by pressing
the MODE button
• After pressing the
SET button in
"Show trips", the
net cycling times
and the saved increa-
se in altitude of the
trips/legs appear
By pressing the SET button for 3 seconds, all
values of the trip/leg which has just been dis-
played will be deleted.
If the SET button is pressed for 3 seconds in
the "Delete trips" window, the data recorded
for all trips/legs will be deleted and a new
trip/leg will be started.
Pressing the MODE button takes you back to
the submenu "Trip".
3 seconds
La 01
p
BB 4000
4.5 Submenu "Pilot" PILOT
Pilot
BB 4000
Starting, stopping and resetting the stop-
watch
• Start or stop the stopwatch by pressing the
SET button
• Zeroing of the stopwatch by pressing the
SET button for 3 seconds
Adjusting the adding counter of the
increase in altitude
• Press the SET button for 3 seconds
• The display "Set altitude" appears and the
first digit for entry flashes
• The display of the adding counter of the
positive change in altitude can be modified
(only possible with the stopwatch off)
Stopwatch
Current speed
Daily increase in
altitude
21
59