Advertisement
S-2B
36. Use the method shown to locate the mounting screws holes on cowling. Then install your preferred
brushless motor onto the motor mount. The motor box has a built in 3 degrees of right thrust. Make sure
the motor is offset a few millimetres to the left so as to bring the motor shaft back to center of the cowl
when it has been installed.
37. Trial fit the cowling onto the fuselage. In the meantime, you may also install the propeller and spinner
to the motor and align everything together and find the perfect fit of all components. Once satisfied with
the fit of the cowl you can mark it as shown using masking tape and then drill the holes for mounting.
38. Canopy & Cockpit assembly.
16
Advertisement
