Advertisement
Installation
Also follow operating instructions provided with the welding machine.
WARNING! The power source must be deactivated!
Gas-cooled connection
Connecting power cable and gas hose
Connect the power cable and the gas hose to the appropriate connectors on the welding machine
and ansure tight connections by properly affixing the couplings.
Exception
When torch is fitted with a gas valve (V-torch), connect separate gas hose to an external gas
cylinder. But before connecting it to the gas cylinder, open the gas bottle's pressure regulator a few
times briefly to flush away any dirt. After that, make the connection and tighten with a wrench.
You can then set the desired pressure using the pressure regulator.
The pressure will depend on the item to be welded and the gas cup size.
Connecting switching cable
Connect the welding torch plug into the appropriate socket on the welding machine, and check for a
solid connection.
Water-cooled connection
Connecting power cable and gas hose
Connect the power cable and the gas hose to the appropriate connectors on the welding machine
and ansure tight connections by properly affixing the couplings.
Connecting (blue) water inlet hose and (red) water outlet hose
Connect the blue water inlet hose and red water outlet hose by inserting gas nipple into the
appropriate nipple receptors on the welding machine according to the colour markings. Ensure that
the connections are solid.
Connecting switching cable
Connect the welding torch plug into the appropriate socket on the welding machine, and check for a
solid connection.
English
WARNING
Read the instructions of your welding machine prior
to use so as to be sure how to attach your welding
torch.
Read the instructions of your welding machine prior
to use so as to be sure how to attach your welding
torch.
5
English
Advertisement
