Access Settings; Figure 4.0 Webcontrol - CAI Networks WebControl PLC User Manual

TM
WebControl PLC User Guide Version 3.02.17f
network in order to configure it correctly. Figure 4.0 shows the Network settings
TM
WebControl has.
TM

Figure 4.0 WebControl

PLC Network configurable
3.1.1 NTP Server Settings
This version changed from previous versions by reduced Allowed Limits host IP
address from eight to four. In addition, it added NTP Server section to allow user to
enter his local NTP server's IP address to overwrite the default pool.ntp.org resolved
TM
IP address. By default NTP server field should be 0.0.0.0, so that WebControl will
use pool.ntp.org as the Network Time Protocol server.

3.1.2 Access Settings

For security purpose, you can decide your own user name and password. For being
used over Internet, you may also set the access list, so that only host in the list can
Copyright(c) 2008,-2013 CAI Networks, Inc. 6