Output Control; Figure 6.0 Webcontrol - CAI Networks WebControl PLC User Manual

TM
WebControl PLC User Guide Version 3.02.17f

3.4 Output Control

TM

Figure 6.0 WebControl

Output Control
When click on each TTL output On or Off, the current state of the TTL output will
change. However, the display may or may not update depending on the "Web
pulling" enabled in the General Setup screen. If you did not enable the "Web Pulling"
to save the bandwidth, you will need to use browser refresh to see the output state
change. Please note "Save States" button will make WebControl store the state in
the EEPROM. When power lost and reapplied, the output will remember the states
being saved.
Copyright(c) 2008,-2013 CAI Networks, Inc. 11