Direct Query System Inputs And Outputs - CAI Networks WebControl PLC User Manual

TM
WebControl PLC User Guide Version 3.02.17f

4.6 Direct Query System Inputs and Outputs

To integrate with other servers, directly query I/O status maybe desirable. Using wget
command from other servers or computers, user can directly query each input and
output status. The following HTTP commands are directly return the I/O values:
"geta1.cgi, geta2.cgi, geta3.cgi" – to query analog input values
"geth1.cgi" – to query the humidity sensor readings
"geti1.cgi, geti2.cgi,..geti8.cgi" – to query each digital input values
"geto1.cgi, geto2.cgi,...geto8.cgi" – to query each TTL output status
"gett1.cgi, gett2.cgi,...gett8.cgi" – to query each temperature sensor value
"getts1.cgi, getts2.cgi,...getts8.cgi" – to query each temperature sensor status
"getcounter.cgi" – to query the counter value
"getfcounter.cgi" – to query the frequency measurement per second value.
"getall.cgi" – to query all sensor and I/O status
VAR1-VAR8 can also be set by web UI. Please see FAQ section for how to do that.
Copyright(c) 2008,-2013 CAI Networks, Inc. 20