ECOSTAR WM08-700 Owner's Instruction Manual page 9

Preparation Before Wash
Please follow the below step guide before starting washing
1
Adjust the adjustable foot to make the washer to be placed stable
Adjustable foot (extend when clockwise rotating and shorten when
counter clockwise rotating)
(Slightly incline the washer first and loosen the adjustable foot knob.
Adjust the adjustable foot so as to ensure four corners of washer be
steadily contacted with the ground. Then tighten the adjustable foot
knob and lock it. If the ground is obviously not flat, correction should be
made on the ground surface, otherwise the washer barrel will incline and
knock the cabinet).
2
Install the water inlet hose
3
Connect the power source
4
Turn on the water supply
5
Put down the drain hose
6
Put in clothes and suitable amount of washing powder for washing.
NOTICE
！
Before washing, please do take out coins, keys and other hard goods,
and zip up clothes tightly to prevent them and barrel from damage.
For one inlet hose
7
Foot Rotate clock wise
For two inlet hoses
Gravity drain