Placing And Leveling; Leveling The Machine - ECOSTAR WM08-700 Owner's Instruction Manual

Placing and Laveling
Please ensure that all the tapes, safety packing, protective material has been removed before operating machine.
1
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the right
side and left; sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is
suggested.
NOTE
If the washer is installed on uneven, weak or tilted floor causing excessive vibration, spin failure can
happen. lt must be placed on a firm and level floor to prevent spin failure.
Check that the machine is level
Open the lid and look from above to see if it seem in perfect center from all sides

Leveling the machine

Lift the front of the washing machine and twist the Adjustable Leg until it's
placed in the center.
*Please check that Anti-Rat Cover (optional) is firmly fixed on Washing machine and screw properly
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical portable
outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
Top view of the Washing Mahine
WRONG CORRECT
14