ECOSTAR WM08-700 Owner's Instruction Manual page 12

Function of Each Button
POWER
ON and OFF Button
Automatic Power
START / PAUSE
After program selection, press the button
to start. Press the button to pause in the
course of operation, press the button
again the program continues till the
program is finished.
ECO ECO
10
ONE TOUCH
SMART WASH
After power on, push "START/PAUSE"
button directly to One-key Washing. The
function will be canceled if other buttons,
such as water level, program, temperature
and function are pressed before. It will also
be invalid if there is water left in the inner
tube and the program will be directly set
into Normal with default water level 6.
Washing Machine will perform fuzzy
detection immediately by pushing
"Start/Pause" after power on and water
level and program will be selected
according to amount of clothing. During
the selecting, water level lamp is flashing
continuously, as digital display shows"--",
at the same time, only power button is
effective. After detecting is completed,
program is chosen to "Quick" with
automatically setting water level 1/2/3 and
"Standard" with water level 4/5/56 also.
"Super Clean" with water level 7/8.
Program will run automatically when
checked out and finished program and
water level setting.