Figure 43. Direct Channel Entry Screen - Audiovox Satellite Radio Receiver User Manual

Audiovox xm satellite radio receiver user guide
Table of Contents

Advertisement

Numbered Buttons 0-9
The numbered buttons (0 through 9) provide the operator with a means
of selecting stations by entering the station number when the unit is set
to DIRECT, or selecting preassigned stations when the unit is set to
operate in PRESET (A, B, C).
Direct
When the unit is set to operate in this mode, station selection can be
accomplished by entering its number directly. (e.g., to select station #23,
press 23.) The unit will display the following screen and change to the
desired station 2 seconds later.

Figure 43. Direct Channel Entry Screen

Preset (A, B, C)
The unit has the capability of storing three sets of 10 preassigned
stations for a total of 30 preassigned stations. To assign a station to a
number button, tune in the desired station and hold down the desired
number button until the unit signals acceptance by issuing one short
beep and displaying a screen to confirm for about 1 second.
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmc-10a - xm satellite radio receiver

Table of Contents

Save Article as PDF