Asus ESC8000 G3 User Manual page 47

2. Locate and remove the screw on the metal shutter at the middle of the server (A) then
remove the metal shutter (B).
3. Prepare the GPU air duct and the GPU accelerator.
When installing AMD S9150 or later GPU cards, you need to attach a mylar to the GPU
air duct first before installing the air duct to the GPU card. To do this, get a mylar (A) then
attach it to the air duct (B) as shown.
The mylar is bundled with the system and included in the accessory box.
For Nvidia 300W or above GPU cards, it is required to use the dedicated VGA power cables
with black/white connector. The Nvidia 300W GPU card will not work, or may even cause
damage to the system, if the wrong VGA power cable is used.
ASUS ESC8000 G3
Mylar
metal shutter
GPU air duct (for Nvidia/AMD GPUs)
Mylar
2-25