Cable Connections - Asus ESC8000 G3 User Manual

2.6

Cable connections

• The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you remove the pre-installed components to install
additional devices.
• Refer to Chapter 4 for detailed information on the connectors.
Pre-connected system cables
1. 20-pin power connector (from the motherboard to the power distribution board) and 4-pin
HDD_PWR1 connector (from the motherboard to the HDD backplane board)
2. Rear I/O connector (from motherboard to LAN 1 and 2 port on the rear I/O board)
3. ISATA / ISSATA connectors
4. USB connector (from motherboard to front I/O board)
5. DM_LAN connector (from motherboard to rear I/O board)
6. Auxiliary Panel connector (from motherboard to front I/O board)
7. Panel connector (from motherboard to front I/O board)
8. System fan connectors (4-pin CPU_FAN1-4, FRNT_FAN1–8, HDD_FAN1-2 from
motherboard to system fans)
9. VGA_HDR1 connector (from motherboard to front I/O board)
10. Serial port (COM port)
ASUS ESC8000 G3 2-21