Asus ESC8000 G3 User Manual page 113

CPU T State Control
ACPI T-States [Enabled]
Allows you to enable or disable CPU throttling by OS. Throttling reduces power
consumption.
Configuration options: [Disabled] [Enabled]
CPU Advanced PM Turning
Energy Perf BIAS
Energy Performance Tuning [Disabled]
Allows you to select whether BIOS or Operating System chooses energy performance
bias tuning.
Configuration options: [Disabled] [Enabled]
Energy Performance BIAS setting. [Balanced Performance]
Allows you to switch between Power or performance.
Configuration options: [Performance] [Balanced Performance] [Balanced Power]
[Power]
Power/Performance switch [Enabled]
Allows you to switch between Power or performance.
Configuration options: [Disabled] [Enabled]
Workload Configuration [Balanced]
Optimization for the workload characterization.
Configuration options: [Balanced] [I/O sensitive]
Averaging Time Window [23]
This is used to control the effective window of the average for CO and PO time.
PO TotalTimeThreshold Low [35]
The HW switching mechanism disables the performance setting (0) when the total PO
time is less than this threshold.
PO TotalTimeThreshold High [58]
The HW switching mechanism enables the performance setting (0) when the total PO
time is greater than this threshold.
Config TDP [Disabled]
This item appears only when you set Power Technology to [Energy Efficient] or [Custom].
This item allows you to enable/disable the Config TDP.
Configuration options: [Disabled] [Enabled]
The following only appears when you set Config TDP to [Enabled].
Config TDP Level [Nominal]
This item provides options that you can select to set the Config TDP level.
Configuration options: [Nominal] [Level 1] [Level 2]
ASUS ESC8000 G3
5-29