Asus ESC8000 G3 User Manual page 161

®
To enter the Intel Rapid Storage Technology enterprise SATA/SCU option ROM utility:
1. Install all the Serial ATA/SAS hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl>+<I> to display the utility main menu.
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
ID Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
• If you want to use SAS HDD for RAID create, be sure you've already correctly installed
the optional ASRK module on the motherboard.
• The RAID BIOS setup screens shown in this section are for reference only and may
not exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
ASUS ESC8000 G3
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
[ESC]-Exit
]
Size Type/Status(Vol ID)
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
[ENTER]-Select Menu
6-25