Jacuzzi J-375 Owner's Manual page 20

J-300
Voltage:
Max. Current Draw:
1-Pump System
2-Pump System
Wattage:
1-Pump System:
2-Pump System:
Frequency:
Number of Wires:
Single Breaker is the factory default.
* For this service, the heater will not operate while either jets pump is
running. The service 1 breaker will include connection for all components.
** For this service, the heater will operate while two jets pump are running.
The service 1 breaker will include connection for all components.
Voltage:
Max. Current Draw:
1-Pump System
2-Pump System
Wattage:
1-Pump System:
2-Pump System:
Frequency:
Number of Wires:
Single Breaker is the factory default.
*** For this service, the heater will operate while two jets pump are running.
The service 1 breaker will include connections for the heater and
transformer. The service 2 breaker is for all other components.
**** In this configuration, the heater will operate while all jets pumps are
running. The service 1 breaker will include connections for the heater
and transformer. Service 2 breaker is for pump 1 and other components.
Service 3 breaker is for pump 2.
14
Export Models (50 Hz) Service
Single Breaker
Service 1
(including Heater)*
230 VAC
15A
17A
3.5 kW
3.9 kW
50 Hz
3
Export Models (50 Hz) Service
Dual Breaker
Service 1/
Service 2***
230 VAC
12A/10A
12A/17A
2.8kW/2.3kW
2.8kW/3.9kW
50 Hz
5
Single Breaker
Service 1 (including
Heater)**
230 VAC
22A
29A
5.1 kW
6.7 kW
50 Hz
3
Three Phase Service
Service 1/
Service 2/Service 3***
230 VAC
N/A
12A/10A/7A
N/A
2.8kW/2.3kW/1.6kW
50 Hz
5