My Device - Philips DreamStation Go User Manual

3. Therapy Device
Icon Text
Tube type
Check
mask fit

My Device

When you select My Device, you will be able to view the following screens. You can
change the settings in the setup menu. These screens will only display if they are
available and enabled on your device. If any of the below options are not visible, your
supplier did not enable those options.
Icon Type
Therapy
Ring
Language
Bluetooth
Time
18
Description
This setting allows you to select the correct tubing type that you
are using with the device. You can choose (12) for the Philips
Respironics 12 tubing type, (15) for the Philips Respironics 15
tubing type, or (22) for the Philips Respironics 22 tubing type.
Note: The 12 type and 15 type tubing are identified on the cuff
with the tubing identifier symbol: "12" or "15". The 22 tubing
type does not have any identifier on the cuff.
This feature allows you to check the fit of your mask prior to
starting therapy. This is done by measuring the amount of leak.
Description
This setting controls the therapy button LED light ring during
therapy. The LED light ring will remain on during therapy if you
select Light On. The LED light ring will fade with the display
backlight if you select Light Dims.
This feature allows you to choose which language to display on
the interface.
This feature allows you to turn Bluetooth off and on. Also, it
allows you to clear the pairing with a compatible Bluetooth
device.
This setting allows you to adjust the time. The default setting
is Greenwich Mean Time, but you may adjust the time in 30
minute increments to match your local time zone.
Note: This time setting should not be used as a clock function
on the device. It is to align your therapy data for your
supplier's data reports.